Sunrise Wall Sealer
Sunrise Wall Sealer is designed to fight and kill out alkali moisture problems present in new or also old masonry surfaces. Sunrise Wall Sealer Tough and flexible film of the binder discoverages the penetration of moisture and salt and Sunrise Wall Sealer providing maximum protection to special Plastic Emulsion and Special Emulsion applied it.
MAIN USES:
Sunrise Wall Sealer Used as filling coat on walls, ceilings and all other masonry surfaces before applying Sunrise Special Plastic Emulsion , Weather resist or Special Emulsion also
| COVERING CAPACITY | 12-10 m / Litre per coat |
|---|
| Hard Dry | 16 Hours |
|---|---|
| SOLID (VOL%) | 48+2 |
| Surface Dry | 2-3 Hours |
| Hard Dry | 1-2 hours |
| Packing | 16 Litres 4 Litres 1 Litre |
| Recoatability | 24 Hours |
| SPECIFIC GRAVITY | 1.30 - 1.50 |
SURFACE PREPARATION:
Confirm that the surface is fully dried & free from powdery material which can be achieved by rubbing with abrasive paper or scraper followed by the removal of loose dust with solvent soaked cloth or cotton.When completely dry now apply one coat of Sunrise wall sealer and let it dry for 24 hours.
APPLICATION:
Thin Sunrise Wall Sealer with 10-15% best quality white spirit. Apply 1 coat and let it dry for overnight filling putty if required should be done with putty. let it dry before applying Sunrise Special Plastic Emulsion. Sunrise Weather All or Matt etc. and Sunrise Special Emulsion. Please note sunrise filling on the exterior surfaces is not recommended use plaster Paris or cement/ mix for removing surface defects.
PREPARATION OF FILLING:
Sunrise Wall Sealer is an best Binder for making wall Putty. Mix 3-4 parts of Sunrise Wall Sealer, with 4 parts of best quality chalk, 1 part of Lithopone. While preparing filling putty add small quantity of water. which will make the putty soft and it application much ensier apply that.
0 Comments