Brighto Super Filler
Brighto Super Filler is ideal or best for filling cracks, holes, gaps in plaster, wood also and other building material. It
forms an ideal base to give a excellent durable, long lasting and smooth finish for emulsion and enamel also.
USAGE:
Brighto Super Filler now ready to use filler that is used on all kind of interior masonry surfaces. It
provides a smooth finish base for the application of all decorative products.
PACK SIZE: 6kg 20kg 30kg
COLOR RANGE: White only
DRYING TIME:
it is Depends on temperature humidity, air movements and film thickness
Touch dry: 2-4 Hours
Hours Recoat: 4-6 Hours
APPLICATION: Putty applicator
CLEANING UP
Clean all equipment like brush ,tray etc with clean water immediately after use.
SURFACE PREPARATION:
New, bare old or previously painted surfaces must be cleary clean,befor dry and free from dust or wax. Clean the
surface by rubbing down with abrasive paper or scraper. Brush down previously painted surface completely and
make the surface smooth finsih. For large holes and cracks in wall, use plaster of Paris or white cement. Allow it to
dry. Apply Brighto Interior Primer in order to seal the surface from bad water and salts and Allow surface to dry
completely. Then apply Brighto Super Filler.
SYSTEM INFORMATION:
New or old or previously painted surfaces.
FILM PROPERTIES:
Water Resistance: Will tolerate the levels of atmospheric humidity present in normal environment.
COMPOSITION (nominal):
Pigment: Inert filler
Binder: Acrylic Copolymer Emulsion.
Solvent: Water
VOLUME SOLIDS:
49 ± 2% (nominal)
FILM THICKNESS/COAT:
Wet: 100-150 Micrometers Dry: 49-73 Micrometers
THEORETICAL COVERAGE:
A guide to the theoretical best coverage which can be achieved under normal conditions is 6-
10m2/litre/coat.
THINNING: Ready to use
0 Comments